Skip to main content

Beam Rebar

Beam Rebar

The Beam Rebar plugin automates the creation and configuration of reinforcement in concrete beams in Autodesk Revit. After launching it from the Jacobian Dev tab, you can configure top, side, and bottom bars plus stirrups, preview the cage, then create or update reinforcement directly in the model.


Jacobian Beam Rebar plugin interface
Figure 1.1: Beam Rebar plugin — configure longitudinal bars, stirrups, and preview the cage before creating reinforcement

Features:​

  • Select and cycle beams​

    • Select a single beam or multiple beams in the model, then cycle through them individually to review and update the reinforcement configuration for each one.
  • Longitudinal reinforcement​

    • Configure Top, Side, and Bottom bars independently: bar type, number of bars, start and end hooks, and comments. A predicted shape section updates as you set bar properties so you can see the shape that will be created.
    • Update stirrup bar type, shape, comment, and spacing, including how stirrups spread along the beam.
  • Dynamic preview​

    • A live preview in the middle of the window updates as you change the configuration, making it easier to review the arrangement before creating reinforcement in Revit.
  • Automatic splice​

    • Divide longer longitudinal bars into manageable lengths where required. Splicing is needed when reinforcement exceeds practical or specified bar lengths. The plugin lets you control where splices occur instead of splitting and managing bars by hand.
  • Cranked bars​

    • Configure cranked longitudinal bars so reinforcement can transition between different positions along the length of the beam. This is useful where bars need to shift to suit changes in the member.
  • Tooltips​

    • Tooltip notes throughout the plugin explain key options as you work.
  • Plan, section, and 3D views​

    • Automatically create the required plan and section views so the reinforcement is easier to review and document. You can also generate a dedicated 3D rebar view with preset view settings to check bar layout and positioning in the model.
  • Bending schedule template​

    • Choose which bending schedule template the plugin should use so output follows the project's existing documentation standards.
  • Create and update rebar​

    • Create reinforcement directly in the Revit model when the configuration is ready. After that, you can update Jacobian-created reinforcement without removing and recreating it — for example to change bar type, add start and end hooks, or modify stirrup spacing. The plugin remembers the settings used for each set, so you can return to those configurations when the design changes.
  • Rebar settings​

    • Switch between shape-driven creation (hooks built into the rebar shape) and separate hooks. Configure which rebar shapes and shape codes are loaded into the project.

Video Demonstration​

Watch the video below to see how the Beam Rebar plugin works:

Beam Rebar Demonstration

Watch on YouTube


Download Plugin​

Anyone can download the plugin and use it for 30 days. After that, you need to be a YouTube member to continue using the plugins.

All versionsRevit 2025 · one installer includes every plugin
  • v1.0.4Latest
    18 Nov 2026 · 29.7 MB · Adds Wall Rebar.
  • v1.0.3
    4 Nov 2026 · 29.0 MB · Adds Foundation Rebar.
  • v1.0.2
    20 Sep 2026 · 13.7 MB · First public release.
For Revit 2025.